美國Fann 209570 HPHT壓濾機配件500ml高溫高壓失水儀樣品杯

　　This Rheometer Cup Heater is intended for controlling temperature of a drilling fluid sample while taking readings with a Rheometer or Viscometer. The low thermal conductivity of a drilling fluid requires that it be agitated while heating in order to reach a uniform temperature in a reasonable length of time.

　　該流變儀杯加熱器用于在用流變儀或粘度計讀數時控制鉆井液樣品的溫度。鉆井液導熱系數低，要求在加熱過程中進行攪拌，使其在合理的時間內達到均勻的溫度。

　　82839536 比重計 OFI 115-00

　　83107124 加熱套 Fann 206966

　　82651450 500ml高溫高壓失水儀樣品杯 Fann 209570

　　82651457 175ml高溫高壓失水儀樣品杯 Fann 209569

　　83107123 175ml高溫高壓失水儀加熱套 Fann 209506

　　83107123 500ml高溫高壓失水儀加熱套 Fann 209541

　　81972339 滾子爐老化罐 OFI 175-50

　　81490030 老化罐杯體內聚四氟O型圈 OFI 175-09-1

　　81490030 老化罐杯體外部O型圈 OFI 175-46

　　81972341 直徑3/8英寸固定螺釘 OFI 175-14

　　81972340 閥桿 OFI 175-16

　　Safe operation of the Cup Heater requires the operator understand and practice the correct assembly and operation of the equipment. Improper assembly, operation, or the use of defective parts could result in serious injury and damage. Do not immerse the Cup Heater in water for cleaning. Immersing the unit in water could cause electrical problems, damage to the equipment and possible serious injury. Cup Heaters are electrically heated, and as with any electrical device if the wiring is allowed to become faulty, electrical shorts can occur causing damage to the instrument and possible injury to the operator. These instruments should always be used on a grounded circuit.

　　杯形加熱器的安全操作要求操作者理解并實踐正確的設備裝配和操作。不正確的組裝、操作或使用有缺陷的部件可能導致嚴重的傷害和損壞。不要將熱水器浸入水中清洗。將本機浸入水中可能會導致電氣問題、設備損壞和可能的嚴重傷害。杯形加熱器是電加熱的，與任何電氣設備一樣，如果允許線路出現故障，可能會發生電氣短路，對儀器造成損壞，并可能對操作者造成傷害。這些儀器應始終在接地電路中使用。

　　Fann Instrument Company warrants only title to the equipment, products and materials supplied and that the same are free from defects in workmanship and materials for one year from date of delivery. THERE ARE NO WARRANTIES, EXPRESS OR IMPLIED OF MERCHANTABILITY, FITNESS OR OTHERWISE BEYOND THOSE STATED IN THE IMMEDIATELY PRECEDING SENTENCE. Fann's sole liability and Customer's exclusive remedy in any cause of action (whether in contract, tort, breach of warranty or otherwise) arising out of the sale, lease or use of any equipment, products or materials is expressly limited to the replacement of such on their return to Fann or, at Fann's option, to the allowance to Customer of credit for the cost of such items. In no event shall Fann be liable for special, incidental, indirect, consequential or punitive damages. Notwithstanding any specification or description in its catalogs, literature or brochures of materials used in the manufacture of its products, Fann reserves the right to substitute other materials without notice. Fann does not warrant in any way equipment, products, and material not manufactured by Fann, and such will be sold only with the warranties, if any, that are given by the manufacturer thereof. Fann will only pass through to Customer the warranty granted to it by the manufacturer of such items.

　　凡儀器公司僅對所提供的設備、產品和材料享有所有權，并保證自交貨之日起一年內不存在工藝和材料上的缺陷。沒有任何保證，明示或暗示的適銷性，適用性或其他超出前一句所述。范氏的責任和客戶的補救行動的任何原因(無論是在合同,侵權,違反保證或其他)引起的銷售、租賃或使用的任何設備、產品或材料明確僅限于更換他們回到范氏,或者在范氏的選項,補貼信貸客戶的這些物品的成本。在任何情況下，范恩不應對特殊、偶然、間接、后果性或懲罰性損害賠償負責。盡管在其產品制造中使用的材料的目錄、文獻或小冊子中有任何規格或說明，但范方保留在不另行通知的情況下替換其他材料的權利。Fann不以任何方式擔保非Fann制造的設備、產品和材料，且該等設備、產品和材料僅在制造商提供的擔保(如有)的情況下出售。范恩將只向客戶提供由該等產品的制造商授予其的保證。

　　For your protection, items being returned must be carefully packed to prevent damage in shipment and insured against possible damage or loss. Fann will not be responsible for damage resulting from careless or insufficient packing. Before returning items for any reason, authorization must be obtained from Fann Instrument Company. When applying for authorization, please include information regarding the reason the items are to be returned.

　　為了您的安全，退貨時必須小心包裝，以防止貨物在運輸途中受損，并為可能的損壞或損失投保。凡因包裝不小心或不充分而造成的損壞，范恩概不負責。因任何原因退貨前，必須取得范氏儀器公司的*。申請*時，請注明退貨原因。

　　HPHT Filter Press, Model 175CT simulates filtration against a permeable formation at high temperatures and pressures. Each 175 ml HPHT Filter Press consists of the following components and operating supplies: Stainless steel cell with CellTell?Positive Pressure Indicator Aluminum heating jacket Pressurization System (Nitrogen or CO2 ) Back Pressure Receiver, 15 ml Graduated cylinderFann 209570 500ml高溫高壓失水儀樣品杯

　　高壓壓濾機，175CT模型模擬了在高溫高壓下對滲透性地層的過濾。每175毫升采用HPHT壓濾機由以下組件和操作用品:?不銹鋼細胞CellTell?積極壓力指示器?鋁加熱套?增壓系統(氮氣或二氧化碳)?背壓接收器,15毫升?量筒

　　Measuring filtration and cake-building properties is fundamental to treatment and control of drilling fluids. Studying filtrate characteristics, oil, water, or emulsion content, is also essential. For a drilling fluid, the quantity, type and size of solid particles, emulsified water, and properties of the liquid phase affect the filtration characteristics. Temperature and pressure may influence the interactions of these various components. Therefore, filtration tests are often performed at ambient and high temperatures, providing data for comparison.

　　測定鉆井液的過濾性能和造塊性能是鉆井液處理和控制的基礎。研究濾液特性、油、水或乳液含量也很重要。對于鉆井液來說，固體顆粒的數量、類型和尺寸、乳化水以及液相的性質都會影響鉆井液的過濾特性。溫度和壓力可能會影響這些不同組分之間的相互作用。因此，過濾試驗通常在環境和高溫下進行，為比較提供數據。

　　Wide range of customizing configurations for your specific needs HPHT safety features that help protect from hazards Heavy-duty components and materials that withstand HPHT conditions Pilot light on heating jacket that signals when temperature reaches thermostat setting Single or double opening cells that accept various filter media choices, such as API standard filter paper, ceramic discs of various porosities, and screens of various mesh sizes Choice of 115 volt AC or 230 volt AC heating jacket Pressurization alternatives, such as CO2 cartridges, nitrogen, or in-house source.Fann 209570 500ml高溫高壓失水儀樣品杯

　　廣泛的定制配置您的特定需求采用HPHT安全特性,幫助防止危害重型組件和材料采用HPHT承受條件指示燈在加熱套信號當溫度達到恒溫器設置單引號或細胞接受各種過濾介質的選擇,比如API標準濾紙,各種疏的陶瓷光盤,和各種網孔尺寸的屏幕，可選擇115伏交流電或230伏交流電加熱夾套加壓替代方案，如二氧化碳管、氮氣或內部源美國Fann 209570 HPHT壓濾機配件500ml高溫高壓失水儀樣品杯