當前位置：北京瑞納旭邦科技有限公司>>攪拌配料罐系列>>蒸汽加熱配料罐,蒸汽加熱攪拌罐

蒸汽加熱配料罐,蒸汽加熱攪拌罐

返回列表頁

參考價

面議

具體成交價以合同協議為準

產品型號

品牌

廠商性質生產商

所在地

在線詢價收藏產品

聯系方式：張經理查看聯系方式

更新時間：2022-04-21 12:37:50瀏覽次數：676次

聯系我時，請告知來自食品機械設備網

產品分類 品牌分類

暫無信息

北京瑞納旭邦科技有限公司

經營模式：生產廠家

商鋪產品：178條

所在地區：北京北京市

聯系人：張經理

詢價 給他留言

產品簡介

蒸汽加熱配料罐,蒸汽加熱攪拌罐北京瑞納旭邦流體設備有限公司銷售攪拌罐。經營:蒸汽加熱配料罐,不銹鋼蒸汽加熱配料罐價格,蒸汽加熱攪拌罐,電加熱攪拌罐,不銹鋼配料罐,磁力攪拌罐,攪拌配料罐。電話蒸汽加熱配料罐

詳細介紹

蒸汽加熱配料罐,蒸汽加熱攪拌罐

北京瑞納旭邦流體設備有限公司銷售攪拌罐。經營:蒸汽加熱配料罐,不銹鋼蒸汽加熱配料罐價格,蒸汽加熱攪拌罐,電加熱攪拌罐,不銹鋼配料罐,磁力攪拌罐,攪拌配料罐。電話

蒸汽加熱配料罐

Ingredients cans with steam heating

設備特點:

1.在線CIP清洗、SIP滅菌(121℃/0.1MPa)；2.按照衛生級要求設計適宜的徑*比，結構設計人性化，操作方便；3.采用無級調速機進行調速攪拌，滿足不同操作時段的攪拌要求，傳動平穩，噪音低；4.夾套內設置螺旋式導流環，強化了傳熱過程，換熱效率高，加

熱(冷卻)均勻，節能；5.夾套外的保溫層填充耐*溫、抗老化的珍珠棉保溫，具有良*隔熱保溫效果；6.外飾面筒體外形美觀、整潔；7.內罐體表面做鏡面拋光處理(粗糙度Ra≤0.4µm)，各進出管口、視鏡、人孔與內罐體焊接處均采用拉伸翻邊工藝圓弧過渡，光滑易清洗*，保證生產過程的可靠性、穩定性，符合“cGMP”等規范要求。

設備附件配置：

快開式衛生人孔、窺視燈鏡、溫度計(表盤指針式)、呼吸器、CIP清洗器、攪拌轉速顯示儀、料液進出口、采樣口(采樣閥)、SIP滅菌口、液位傳感器口、冷熱媒進出口等接口。

Equipment features：

1. Online CIP cleaning, SIP sterilization (121℃/0.1MPa). 2. According to the hygiene level requirement to design suitable diameter ratio,structure design of humanistic and convenient in operation. 3. Adopt stepless speed regulation machine of speed mixing, meet different operation period of mixing requirements,smooth transmission, with low noise. 4. Clip set inside set screw diversion ring, strengthened the heat transfer process, high thermal efficiency, uniform heating and cooling, saving energy. 5. The thermal insulation layer of clip set outside fill of high temperature resistant, anti-aging pearl cotton to be insulated, with good heat insulation and preservation. 6. The appearance of outside facing cylinder body is beautiful and neat.7.Do processing of mirror polishing inside the tank surface(roughness Ra≤0.4µm),each access orifice, as a mirror, manhole and internal tank welding place adopts tensile flanging process arc transition, smooth, easy cleaning with no dead angle, ensure security and stability of the production process, accord with "cGMP" and the other specification requirements.

Equipment accessories configuration:

Quick open-die health manhole, peep lamp mirror, thermometer (dials pointer type), scuba, CIP cleaning device, stirring speed display, liquid materials of import and export, sampling mouth (sampling valves), SIP sterilization mouth, level sensor mouth, hot and cold media and interface (Pictures for reference only.).

主要技術參數The main technical parameters：

公稱容積Nominal volume	300L	500L	1000L	2000L	3000L	5000L	10000L	20000L	30000L
內罐體直徑Inside diameter of the tank(mm)	Ø700	Ø800	Ø1100	Ø1400	Ø1600	Ø1700	Ø2000	Ø2600	Ø3000
換熱面積Heat-exchange area (m²)	1.7	2.5	4.5	7.0	9.0	13	21	32	43
攪拌功率Mixing power (kW)	0.55	0.75	1.1	1.5	2.2	3.0	5.5	7.5	11
攪拌轉速 Stirring speed (r/min)	攪拌調速范圍:40～200轉/分，攪拌槳形式:二葉螺旋推進式。Stirring speed range: 40～200 R/Min, Impeller form: Push type of bicuspid spiral.
工作壓力 Work pressure(MPa)	夾套Clip set :0.08～0.6MPa，內罐體常壓:The atmospheric pressure of inside tank: 0.5MPa
工作溫度 Working temperature (℃)	夾套Clip set :<160°C，內罐體Inside tanks:<150°C，夾套換熱介質:蒸汽(或熱水)、冷卻水。Heat transfer medium of clip set: steam (or hot) water, cooling water.
設備材質 Equipment materials	內罐體SUS304或SUS316L；夾套SUS304或Q235-B；外飾面筒體SUS304。Inside tank:SUS304 or SUS316L；Clip set: SUS304 or Q235-B；Outside facing cylinder:SUS304.
容器類別 Category of container	根據設計壓力、介質特性分類為常壓容器、一類壓力容器According to the design pressure, medium specific classification for atmospheric vessel, a pressure vessel.