ZRJ-500L真空乳化機
1. 結構形式：有主機1臺，油相鍋1只，水相鍋1只，操作平臺1件等組成。主鍋，油相鍋，水相鍋的內膽材質316L，夾套材質304，外套材質304。
2. 主鍋有效容量550L，工作量500L，油相鍋有效容積250L，水相鍋有效容量310。油水鍋主要將物料預熱，然后進入主鍋乳化。
3. 加熱方式：電加熱，功率主鍋12kw，油相鍋8kw，水相鍋8kw。夾套內可進行油加熱或進水加熱，如果進油加熱必須配一只油罐容積為150L，配一臺轉油泵，就可以循環加熱。
4. 冷卻方式：自來水冷卻。
5. 乳化方式：均質器與高速切剪刀進行乳化。電機功率7.5kw-2p變頻調速。
6. 攪拌方式：框式回流攪拌槳進行攪拌及刮壁，功率3.7kw-4p變頻調速。
7. 開蓋方式：雙桿液壓升降，電機功率2.2kw，配有安全自鎖裝置。
8. 進料方式：真空自吸進料，主要由油相鍋和水相鍋的物料進入主鍋乳化。
9. 出料方式：有三種，1.底部氣動出料 2. 電動倒鍋出料 3. 正氣壓出料。
10. 控制方式：所有動作及溫度均由觸摸屏控制（包括進出料）
11. 外開尺寸：主機長×寬×高，2900×1200×2600mm。工作時上升高度3800mm 包含油水鍋整套外形尺寸：長×寬×高 3500×3050×2600mm
ZRJ-500L Cream Vacuum Emulsification Blender
1. Composition: main machine one set, oil tank one unit, water tank one unit, operation platform one set, 316L stainless steel for the inner material of main tank, oil tank, water tank, 304 stainless steel for jacket material and outer material of main tank, oil tank, water tank.
2. Valid volume for main tank: 550L; Working volume: 500L; Valid volume for oil tank: 250L; Valid volume for water tank: 310L; Oil and water tank is used for pre-heating the material, then the material enters the main tank for emulsification blending.
3. Heating method: heating by electricity, power of main tank: 12kw, power of oil and water tank: 8kw, heating medium can be used by oil or water, if heating by oil, it should heat cycling by oil pump and another oil tank (150L).
4. Cooling method: cooling by water
5. Emulsification method: emulsified by mixer and high-speed scissors. Power: 7.5kw-2p frequency converter
6. Blending method: Frame type overflow mixing paddle is mixing the material and scraping the wall
7. Cap open method: lift by hydraulic pressure, motor power: 2.2kw, with safety auto-lock system.
8. Material feeding method: auto-sucking the material under vacuum from oil and water tank into the main tank.
9. Material releasing method: three ways: 1. From the outlet pipe under the main tank by pneumaticity. 2. From turning over the main tank by electricity. 3. by positive air pressure.
10. Control method: Controlled all by touch screen, including the temperature and material feeding and releasing.
11. Outer dimension: main machine: 2900*1200*2600mm; the maximum lifting height: 3800mm; including the oil and water tank dimension: 3500*3050*2600mm.
